The specific operation method is as follows:

1. First, check the four corners of the folding tent bracket for any abnormalities. Pay attention to the four spring buckles on the corners. The spring buckles of the propped tent should be buckled in the square tube eye, which can move up and down.

2. Untie the spring clasp from the square tube eye. The four corners of the spring buckle are all unfastened.

3. Remove all the items in the folding tent.

4. Two people stand opposite each other, each holding the two brackets of the folding tent with both hands.

5. It should be noted that the two people should stand at the longitudinal folding position of the canopy bracket to ensure that the canopy bracket can be folded when exerting force.

6. The two people push the bracket toward each other together to fold the canopy bracket.

7. When folded to 70%, the folding tent can be placed flat on the ground. Pay attention to the cleanliness of the floor and do not soil the tent.

8. Uncover the four corners of the tarp. The four corners of the tarpaulin are on the four corners of the tent frame, and the velcro is used to close it tightly.

9. Remove the canopy bracket, put the four foot brackets away, and push in the inner tube.

{1} After the tent is used, in addition to cleaning up the dust and attachments in time, the moisture on both sides of the fabric should be wiped off or dried, and the tent should be completely dried before folding and storing. This is very important. If it is stored before it is completely dry, it is easy to cause mildew and adhesion of the fabric, which will affect the service life of the tent.

{2} If you have to take down a damp tent, remember to dry it as much as possible. When conditions do not permit, you can temporarily put it in the bag for one day. But if possible, take it out and blow it in the sun, or use a dryer or hair dryer to dry it. Be careful not to get too close to prevent it from baking out.

{3} If mildew occurs, you can scrub it with warm soapy water and a sponge, and then wipe it with a dry sponge. Then use a sponge with half a cup of cresol soap solution (Lysol commonly known as Lysol) and a gallon of hot water for cleaning. Let the solution stay on the surface of the fabric and let it air dry. Then, mix a cup of salt, a cup of strong lemon juice, and a gallon of hot water, rub the solution into the visible mold spots, and let it dry. In this way, the growth of mold can be prevented and the mold smell can be eliminated, but the traces of mold cannot be removed. Losses caused by mold are not covered by the warranty. These methods are only provided to extend the life of the tent when it becomes moldy.

{4} After the tent is completely dry and folded and stored, try not to put other items on the tent, so as to avoid permanent fatigue in the bending part of the waterproof tape material and degumming. Personal experience is to find a cardboard box to store the tent. Put the tent on top as much as possible when packing.